Have a PC case that supports a top-mounted 240mm radiator? Take your CPU cooling to a new level. H100i starts with the advanced design of the Hydro Series H80i, and adds a double-wide radiator for even better performance.
Corsair Link Monitoring and Control
Monitor temperature and control lighting and fan speed on your screen. No additional hardware is necessary.
Features
Self-contained Cooling System
Hydro Series H100i comes pre-filled, and never needs refilling or priming.
Dual Radiator with Custom Fan Design
The 240mm top-mounted radiator provides maximum surface area for maximum cooling power. The 120mm fans use wide, low-pitch blades for better static pressure to noise ratio, offering improved efficiency at lower noise levels.
Built-In Corsair Link
No additional hardware is necessary – just connect the included Corsair Link cable to a USB header on your motherboard and download the free Corsair Link Dashboard software. You can monitor coolant temperature and adjust cooling performance directly from your desktop.
Tool-free multiplatform magnetic mounting bracket kit
The modular design makes installation simpler, and it’s compatible with Intel and AMD processors.
Large-diameter, low permeability tubing
Minimal coolant evaporation helps ensure long life, and the resilient material offers both high flexibility and excellent leak protection.
Have a PC case that supports a top-mounted 240mm radiator? Take your CPU cooling to a new level. H100i starts with the advanced design of the Hydro Series H80i, and adds a double-wide radiator for even better performance.
Corsair Link Monitoring and Control
Monitor temperature and control lighting and fan speed on your screen. No additional hardware is necessary.
Features
Self-contained Cooling System
Hydro Series H100i comes pre-filled, and never needs refilling or priming.
Dual Radiator with Custom Fan Design
The 240mm top-mounted radiator provides maximum surface area for maximum cooling power. The 120mm fans use wide, low-pitch blades for better static pressure to noise ratio, offering improved efficiency at lower noise levels.
Built-In Corsair Link
No additional hardware is necessary – just connect the included Corsair Link cable to a USB header on your motherboard and download the free Corsair Link Dashboard software. You can monitor coolant temperature and adjust cooling performance directly from your desktop.
Tool-free multiplatform magnetic mounting bracket kit
The modular design makes installation simpler, and it’s compatible with Intel and AMD processors.
Large-diameter, low permeability tubing
Minimal coolant evaporation helps ensure long life, and the resilient material offers both high flexibility and excellent leak protection.
this keeps my Proc nice and chilly. Easy to install and nice and quiet. Had to go online to get the software for it.
(Read More)
Nevermoar 05/13/13
Verified Owner
This cooler is great. It's a piece of cake to install, and looks good. Thank god they went with a SATA power connector this time around as well instead of Molex. The fans are gray, and to me that is a great aesthetic as it goes with everything. Only issue I have with it is with my case/motherboard. If you have a big top VRM heatsink, push/pull may be a tight fit.
I have mine on intake on the top of my Cosmos II case, and it keeps my 3770k cool at 4.9GHz and 1.2v.
(Read More)
Nick_B 05/05/13
I recently bought this for overclocking my i7 950. My previous cooler was a Noctua NH-U12P. While OCing at 3.8ghz my i7 was easily exceeding 100 C at full load. I think this was partially due to my case configuration since I have a lanboy air so this review is a bit of an apple and oranges comparison. When I installed the H100i my temperatures went down to a stable 70 C at full load. I'm currently running at 4.2 ghz and the processor idles around 40 C and at full load is around 75 C.
I did have some issues installing the H100i into my lanboy air case. Since the cooler is all-in-one it's not possible to use the lanboy air's intended design for water cooling which puts the radiator on top of the case with water tubes entering the case at the back. (Didn't realize this until after I bought it.) It's also not possible to install the radiator at the inside top of the case because the external IO cabling gets in the way. I ended up using superglue to attach the radiator (and fans) to one of the cases' side panels. Since the H100i has ports on it for up to 4 fans I added the two Noctua fans to the radiator for a push-pull configuration. I also installed a separate fan in the top of the case so that cool air comes down from above and then out the side through the radiator. This configuration works well because it also provides cooling for my RAM. I also had to remove my rear fan to make space for the radiator which is where I got the extra top fan from.
(Read More)
Please note that NCIX.com Forums
is not a sales or product support board. For
sales or specific product related questions, please send message
to receive the fastest response.
Messages about Corsair Cooling Hydro Series H100I CPU Cooler System LGA1155 1156 1366 2011 AM2 AM3 FM1 & FM2
Forum messages are not reviewed and may not contain accurate information about a product.
Message contents are opinions from customers based on their own experience with a product.
We do not recommend you make puchasing decisions based on Forum messages.
Customer Reviews
Product reviews on NCIX.com are screened for relevance and inappropriate
content. Reviews may contain inaccurate information about the product.
If there is a discrepancy, please use the Flag this Review link
located beside each review. Reviews are not an endorsement expressed by
NCIX.com, but opinions from customers based on their own experience with
a product. We do not recommend you make purchasing decisions based on facts or opinions expressed in these reviews.
Both hardware and software install was easy. I contacted Corsair for backplate to fit my LGA 775 socket Mobo and their response was excellent. However I am not seeing the drop in CPU temps that I was hoping for. I previously had a Zalman 92mm LED CPU Cooling Fan - Curved Heatpipe Design, Multi-socket Support, 2 Ball-bearing (CNPS9500A LED)installed and temps hovered around 30-45C depending on the core and load on my Q9450. That's pretty much what I am getting now on the balanced profile in Corsair Link. I'm getting 29-44 with fans at full speed. The cooler is installed in an Azza 2000 case and I left the top fans in for what I hope is a push pull configuration. So for 2 times the price of my Zalman I'm getting about the same performance. Hmmmm????
This review was modfied by poster @ 06-18-13 08:51 PM
(Read More)
This cooler is great. It's a piece of cake to install, and looks good. Thank god they went with a SATA power connector this time around as well instead of Molex. The fans are gray, and to me that is a great aesthetic as it goes with everything. Only issue I have with it is with my case/motherboard. If you have a big top VRM heatsink, push/pull may be a tight fit.
I have mine on intake on the top of my Cosmos II case, and it keeps my 3770k cool at 4.9GHz and 1.2v.
(Read More)
Got this on sale, and I must say it is working well; it runs a little cooler than my 212 that I had to replace when i changed into a smaller case. With that said however, I did have some issues. I did find that the thermal paste was lackluster, and I ended up replacing it with some arctic silver that dropped the temps around 10c at full load. Fans are load over 1500rpm (then again what fan isnt!). However i do suggest using a fan controller, i was not a huge fan of corsair link.
(Read More)
I recently bought this for overclocking my i7 950. My previous cooler was a Noctua NH-U12P. While OCing at 3.8ghz my i7 was easily exceeding 100 C at full load. I think this was partially due to my case configuration since I have a lanboy air so this review is a bit of an apple and oranges comparison. When I installed the H100i my temperatures went down to a stable 70 C at full load. I'm currently running at 4.2 ghz and the processor idles around 40 C and at full load is around 75 C.
I did have some issues installing the H100i into my lanboy air case. Since the cooler is all-in-one it's not possible to use the lanboy air's intended design for water cooling which puts the radiator on top of the case with water tubes entering the case at the back. (Didn't realize this until after I bought it.) It's also not possible to install the radiator at the inside top of the case because the external IO cabling gets in the way. I ended up using superglue to attach the radiator (and fans) to one of the cases' side panels. Since the H100i has ports on it for up to 4 fans I added the two Noctua fans to the radiator for a push-pull configuration. I also installed a separate fan in the top of the case so that cool air comes down from above and then out the side through the radiator. This configuration works well because it also provides cooling for my RAM. I also had to remove my rear fan to make space for the radiator which is where I got the extra top fan from.
(Read More)
Excellent results on my 980x g 4.25 Ghz running 19c to 30c g idle with peak Temps (Linpak ) 71c on hottest Cores, believe about 6c cooler than the old TRUE .
Set-up in push mode up top intake from room and "push" thru Radiator.
(Read More)
This is one of the best coolers you can get for your rig in my opinion. The Link system is fully customize-able and allows you to control/monitor your pump speed and temp as well as fan speeds, gpu temp and gpu fan speed, HDD temp and SSD temps(and probably more. That is just what I've used it for thus far.) Can also log and has a 256 RGB LED on the pump(on cpu) that you can have match your own lights or case.
(Read More)
All pricing subject to change. For all prices,
products and offers, NCIX.com reserves the right to make adjustments
due to changing market conditions, product discontinuation, manufacturer
price changes, errors in advertisements and other extenuating
circumstances. Promotional offers from NCIX.com are subject to
availability and are available only while supplies last. No rain
checks will be issued on promotional items and offers.
While NCIX.com uses all reasonable efforts
to include accurate and up-to-date information on the Site, NCIX.com
makes no warranties or representations as to the Site's accuracy.
NCIX.com assumes no liability or responsibility for any errors
or omissions in the content on the Site.
NCIX.com warrants product(s) to be in good
working condition and free from defects in material and workmanship
for a period of one (1) year for OEM packages, and for thirty
(30) days for RETAIL packages, from the original Invoice date
unless otherwise restricted below or by the manufacturer's own
warranty policy. Defective returns and warranty service will be
replaced, exchanged or repaired at NCIX.com's sole discretion,
and based on vendor's policy.
NON-DEFECTIVE merchandise returns may be
accepted on some items ONLY within 15 days of the Invoice date,
at NCIX.com's discretion. All NON-DEFECTIVE returns are subject
to a 15% restocking fee. No refunds will be issued for blank media,
digital cameras (and accessories), opened software, printers,
printer supplies, paper, projectors (and accessories), appliances,
handhelds, PDAs, notebook computers, special order computers and
special order items.
Defective software, video games or DVDs
will be replaced by the SAME title and format ONLY (and subject
to current availability) within 30 days of the Invoice date. Software,
video games and DVDs may be returned within 30 days only if the
item is UNOPENED (with shrink wrap still intact) at the sole discretion
of NCIX.com.
NCIX.com does NOT apply a surcharge
to credit card orders. Please read our RMA
& warranty policy and terms
& conditions for more information. If you have
any questions regarding our sales and warranty policies, please
send us a message -- we'll be glad to answer any of your questions.
Product Warranty
NCIX provides a 30 day limited warranty on this product. The remainder of the 1 year warranty is provided by the manufacturer.
Corsair's DRAM memory modules all carry a lifetime warranty. The Flash Voyager, Flash ReadOut, TurboFlash, Flash Survivor and Mini Flash products all have a warranty for the expected normal life of the product (10 years). The Flash Padlock has a warranty of 3 years. The HX, TX, and VX Series of Power Supplies have a 5 year warranty, and Liquid Cooling products carry a one year warranty. In general, this means Corsair products are guaranteed to operate, as specified by their datasheet, and in the operating environment for which they were intended, for the life of the product or the extent of the warranty.
For additional information and technical assitance, please visit Corsair Memory's support site at:
VIEW CART
CANADA | 
USA
Verified Owner
May We Also Suggest
(1)
